Safety Operating Procedures for Loaders
Jan 23,2024
When the loader is running, the bucket should be retracted, and the bell bucket should be about 400~500mm from the ground. Pay attention to whether there are roadblocks or high-voltage lines during driving. Except for the specified drivers, no other passengers are allowed.
During the installation, avoid sudden reversing. When the bell bucket is lifted with load, do not turn sharply and brake sharply.
When the loader is driving on the highway, it must comply with the traffic rules and drive carefully. It is forbidden to slide in neutral when going downhill.
If the engine stops on a sloping slope, put the bucket on the ground and brake, put the operating levers in the middle position, and then start the engine.
The loader should pay attention that the stick should not be raised too high.
When unloading the slope, trench and pit, pay attention not to extend the bucket too far to avoid overturning.
It is not allowed to work on the site with the gradient exceeding the specified value, and there are no obstacles and irrelevant personnel in the operation area.
When the loader bogie is not locked, it is forbidden to stand between the front and rear frames for maintenance.
After the boom is raised, the safety pin must be installed or other measures must be taken to support the boom before lubrication and adjustment to prevent the boom from falling and hurting people.
After operation, the loader should be parked in a safe place, the bucket should be placed flat on the ground, all operating levers should be placed in the middle position, and the brake should be locked.
NEXT
NEXT
Eligible models
MLT738 is the latest telescopic handler truck launched by our company. With its high-horsepower engine, MLT738 has surging power and strong passability. MLT738 can easily handle various tasks in agriculture. At the same time, we can provide a variety of auxiliary tools, such as large-capacity grain buckets, pitchforks, round bale clamps, etc. , one-stop solution to all customer problems.
WL08 is the best solution for working in narrow spaces and narrow passages. And with this machine and a large number of accessories related to road construction, agriculture, and horticulture, a considerable amount of work can be carried out.The entire vehicle is made of pure iron, which is particularly suitable for forest and outdoor forest operations such as wood grabbing.This machine has a small turning radius and fast driving speed, and can be deployed in buildings as well as on paved and unpaved sites.
WL10 is the best solution for working in narrow spaces and narrow passages. And with this machine and a large number of accessories related to road construction, agriculture, and horticulture, a considerable amount of work can be carried out.The entire vehicle is made of pure iron, which is particularly suitable for forest and outdoor forest operations such as wood grabbing.This machine has a small turning radius and fast driving speed, and can be deployed in buildings as well as on paved and unpaved sites.
Request a quote
Do you need any help? We are here to help!
To request a quote or find a local dealer, please fill out the form below. If you cannot find the product you need, please feel free to call +86 18366356399 or max@eougem.com Contact us and we will reply to you within 1 hour.
EOUGEM is a leading manufacturer of construction machinery in China, committed to producing high-quality medium and small loaders, hydraulic excavators, and various engineering mechanical deformation products.
Copyright © 2024 SHANDONG OUJIN ENGINEERING MACHINERY CO.,LTD. All rights reserved. SEO