How to choose a suitable loader
Jul 18,2025
1. Clarify the needs: start with the rated load
The first step in choosing a loader is to determine the tonnage you need. That is, the rated load determines the load-bearing capacity of the loader operation. Choosing too large will cause the equipment to be idle and waste fuel; choosing too small will not meet the work intensity and even affect the construction period.
1-2 ton small loader:
Use scenario: suitable for environments with small space and relatively small workload, such as landscaping, municipal maintenance, interior decoration, new rural construction and small farms. They are usually used with small tractors and other transportation tools. Oujin Machinery's small tonnage series products are widely praised in these fields for their compact size and flexible steering.
3-4 ton medium loader:
Use scenario: suitable for most earthworks, sand and gravel yards, coal yards, ports and construction sites. Their operating efficiency and load-bearing capacity reach a good balance point.
Large loaders of 5 tons and above:
Use scenarios: Mainly used in large mines, heavy-loaded docks, and occasions that require supporting operations with large transport machinery of more than 10 tons. Its characteristics are long working cycles and large workloads.
2. Optimize operating efficiency: Bucket capacity is the key
When choosing bucket capacity, you need to consider the following two points:
Material density: The actual weight of buckets of the same capacity when loading different materials (such as sand, coal, and stones) will vary greatly. Therefore, you need to choose a suitable bucket based on the main material type in your daily operations.
Diverse attachment selection: In addition to standard buckets, Shandong Oujin Machinery also provides a variety of special-shaped loaders and attachments such as fork grass trucks, snow blowers, and heightened grain buckets to meet your diverse needs in different seasons and special working conditions.
3. Accurate matching: working conditions determine the choice
Different working environments have completely different requirements for the performance of loaders. Therefore, it is crucial to fully consider your actual working conditions. Is it soft land, muddy farmland, or hard mines or flat roads? Different ground conditions have different requirements for tire selection and machine driving performance.
Space constraints: Narrow warehouses, tunnels or city streets have strict restrictions on the turning radius and overall machine size of the loader. Ojin's small loaders are designed for such narrow working conditions and are flexible.
Working height: If materials need to be lifted to a higher position, such as loading a high-rail truck, then the unloading height and lifting capacity become parameters that must be considered. Ojin provides optional components such as extended arms to meet special lifting height requirements.
Eligible models
MLT738 is the latest telescopic handler truck launched by our company. With its high-horsepower engine, MLT738 has surging power and strong passability. MLT738 can easily handle various tasks in agriculture. At the same time, we can provide a variety of auxiliary tools, such as large-capacity grain buckets, pitchforks, round bale clamps, etc. , one-stop solution to all customer problems.
WL08 is the best solution for working in narrow spaces and narrow passages. And with this machine and a large number of accessories related to road construction, agriculture, and horticulture, a considerable amount of work can be carried out.The entire vehicle is made of pure iron, which is particularly suitable for forest and outdoor forest operations such as wood grabbing.This machine has a small turning radius and fast driving speed, and can be deployed in buildings as well as on paved and unpaved sites.
WL10 is the best solution for working in narrow spaces and narrow passages. And with this machine and a large number of accessories related to road construction, agriculture, and horticulture, a considerable amount of work can be carried out.The entire vehicle is made of pure iron, which is particularly suitable for forest and outdoor forest operations such as wood grabbing.This machine has a small turning radius and fast driving speed, and can be deployed in buildings as well as on paved and unpaved sites.
Request a quote
Do you need any help? We are here to help!
To request a quote or find a local dealer, please fill out the form below. If you cannot find the product you need, please feel free to call +86 18366356399 or max@eougem.com Contact us and we will reply to you within 1 hour.
EOUGEM is a leading manufacturer of construction machinery in China, committed to producing high-quality medium and small loaders, hydraulic excavators, and various engineering mechanical deformation products.
Copyright © 2024 SHANDONG OUJIN ENGINEERING MACHINERY CO.,LTD. All rights reserved. SEO